Phase 1 Resource Drilling Completed

Criteria	JORC Code Explanation	Commentary
Sampling techniques	· Nature and quality of sampling (e.g. cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling. · Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used. · Aspects of the determination of mineralisation that are Material to the Public Report. In cases where 'industry standard' work has been done this would be relatively simple (e.g. 'reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (e.g. submarine nodules) may warrant disclosure of detailed information.	· The majority of holes were reverse circulation, sampled at 1m intervals. RC samples were collected in large plastic bags attached to the cyclone. On completion of the 1m run the large sample was passed through a 3-stage riffle splitter to collect a 2.5-4kg sub sample, to be used for assay. · A number of diamond holes were also completed as tails to the RC drilling where the target interval was too deep for the RC or in places where the rock was too weathered for the RC to proceed. Core was HQ size, sampled at 1m intervals in the pegmatite, with boundaries sampled to geological boundaries. Half core samples were collected for analysis. · Drilling was carried out to infill previous drilling to achieve a nominal 40m by 40m spacing with selected infill to 40m by 20m spacings. · Collar surveys are carried using differential DGPS with an accuracy to within 0.2m. · A down hole survey for each hole was completed using gyro equipment. · The lithium mineralisation is predominantly in the form of Spodumene-bearing pegmatites, the pegmatites are unzoned and vary in thickness from 5m-109m.
Drilling techniques	· Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (e.g. core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc).	• RC drilling used a 120mm diameter face sampling hammer. · Core drilling was carried out using an HQ double tube core barrel.
Drill sample recovery	· Method of recording and assessing core and chip sample recoveries and results assessed. · Measures taken to maximise sample recovery and ensure representative nature of the samples. · Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.	· RC drilling sample weights were monitored to ensure samples were maximised. Samples were carefully loaded into a splitter and split in the same manner ensuring that the sample split to be sent to the assay laboratories were in the range of 4-6kg. · Core recovery was measured and was found to be generally excellent. · No obvious relationships between sample recovery and grade.
Logging	· Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. · Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. · The total length and percentage of the relevant intersections logged.	· RC holes were logged in the field at the time of sampling. Core was logged in detail in a logging yard. · Each 1m sample interval was carefully homogenised and assessed for lithology, colour, grainsize, structure and mineralisation. · A representative chip sample produced from RC drilling was washed and taken for each 1m sample and stored in a chip tray which was photographed. · Core was photographed.
Sub-sampling techniques and sample preparation	· If core, whether cut or sawn and whether quarter, half or all core taken. · If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. · For all sample types, the nature, quality and appropriateness of the sample preparation technique. · Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples. · Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second-half sampling. · Whether sample sizes are appropriate to the grain size of the material being sampled.	· 1m RC samples were split by the riffle splitter at the drill rig and sampled dry. · Core was cut in half using a diamond saw with 1m half core samples submitted for analysis. · The sampling was conducted using industry standard techniques and were considered appropriate. · Field duplicates were used to test repeatability of the sub-sampling and were found to be satisfactory. · Every effort was made to ensure that the samples were representative and not biased in any way.
Quality of assay data and laboratory tests	· The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. · For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc. · Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision have been established.	· Samples were received, sorted, labelled, and dried. · Samples were crushed to 70% less than 2mm, riffle split off 250g, pulverise split to better than 85% passing 75 microns and 5g was split of for assaying. · The samples were analysed using ALS Laboratories ME-MS89L Super Trace method which combines a sodium peroxide fusion with ICP-MS instrumentation utilising collision/reaction cell technologies to provide the lowest detection limits available. · A prepared sample (0.2g) is added to sodium peroxide flux, mixed well and then fused in at 670°C. The resulting melt is cooled and then dissolved in 30% hydrochloric acid. This solution is then analysed by ICP-MS and the results are corrected for spectral inter-element interferences. · The final solution is then analysed by ICP-MS, with results corrected for spectral inter-element interferences. · Standards/blanks and duplicates were inserted on a 1:20 ratio for both to samples taken. · Duplicate sample regime is used to monitor sampling methodology and homogeneity. · Routine QA/QC controls for the method ME-MS89L include blanks, certified reference standards of Lithium and duplicate samples. Samples are assayed within runs or batches up to 40 samples. At the fusion stage that quality control samples are included together with the samples, so all samples follow the same procedure until the end. Fused and diluted samples are prepared for ICP-MS analysis. ICP instrument is calibrated through appropriate certified standards solutions and interference corrections to achieve strict calibration fitting parameters. Each 40 sample run is assayed with two blanks, two certified standards and one duplicate sample and results are evaluated accordingly. · A QA/QC review of all information indicated that all assays were satisfactory.
Verification of sampling and assaying	· The verification of significant intersections by either independent or alternative company personnel. · The use of twinned holes. · Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. · Discuss any adjustment to assay data.	· All information was internally audited by company personnel. · During this program no holes were twinned. · Savannah's experienced project geologists supervised all processes. · All field data is entered into a custom log sheet and then into excel spreadsheets (supported by look-up tables) at site and subsequently validated as it is imported into the centralised Access database. · Hard copies of logs, survey and sampling data are stored in the local office and electronic data is stored on the company's cloud drive. · Results were reported as Li (ppm) and were converted to a percentage by dividing by 10,000 and then to Li₂O% by multiplying by 2.153.
Location of data points	· Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. · Specification of the grid system used. · Quality and adequacy of topographic control.	· The coordinate of each drill hole was taken at the time of collecting using a handheld GPS with an accuracy of 5m. All collars were subsequently surveyed using DGPS with an accuracy of 0.2m. · The grid system used is WSG84 Zone29N. · An accurate, aerial topographic survey was obtained with accuracy of +/- 0.5m.
Data spacing and distribution	· Data spacing for reporting of Exploration Results. · Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied. · Whether sample compositing has been applied.	· Drilling was carried out on an infill basis to attain on a nominal 40m by 40m and based on geological targets with selected infill to 40m by 20m. · Drill data is considered of sufficient spacing to define Measured and Indicated Mineral Resource in accordance with requirements for a DFS. · Compositing to 1m will be applied prior to resource estimation.
Orientation of data in relation to geological structure	· Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. · If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.	· Drilling was generally carried out using angled holes at NOA with an azimuth of 200° and generally dipping at -60° and intersected the moderately dipping deposit at close to orthogonal to the known dip of the main pegmatite. At Reservatorio the holes were generally drilled at an azimuth of 150° with a dip that varied from -60° to vertical. · Intersections were close to true width for the main pegmatite. · No orientation-based sampling bias has been identified in the data.
Sample security	· The measures taken to ensure sample security.	· Samples were delivered to a courier and chain of custody is managed by Savannah.
Audits or reviews	· The results of any audits or reviews of sampling techniques and data.	· Internal company auditing based on previous programs is carried out and an external review will be carried out by the resource consultant to assure that all data collection and QA/QC procedures were conducted to industry standards.

Criteria	JORC Code explanation	Commentary
Mineral tenement and land tenure status	· Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. · The security of the tenure held at the time of reporting along with any known impediments to obtaining a license to operate in the area.	· All work was completed inside the Mina do Barroso project C-100. · Savannah has received written confirmation from the DGEG that under article 24 of Decree-Law no. 88/90 of March 16 being relevant justification based on the resources allocated exploited and intended, Savannah has been approved an expansion up to 250m of C100 mining concession in specific areas where a resource has been defined and the requirement for the expansion can be justified.
Exploration done by other parties	· Acknowledgment and appraisal of exploration by other parties.	· Limited exploration work has been carried out by previous operators. · No historic information has been included in the Mineral Resource estimates.
Geology	· Deposit type, geological setting and style of mineralisation.	· The lithium mineralisation is predominantly in the form of Spodumene-bearing pegmatites which are hosted in meta-pelitic and mica schists, and occasionally carbonate schists of upper Ordovician to lower Devonian age. The pegmatites vary in thickness from 5m-109m.
Drill hole information	· A summary of all information material to the under-standing of the exploration results including a tabulation of the following information for all Material drill holes: · easting and northing of the drill hole collar · elevation or RL (Reduced Level - elevation above sea level in metres) of the drill hole collar · dip and azimuth of the hole · down hole length and interception depth · hole length · If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.	· A table containing all drill holes drilled and a list of significant assays from the results received is included with the release. · No material data has been excluded from the release. .
Data aggregation methods	· In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (e.g. cutting of high grades) and cut-off grades are usually Material and should be stated. · Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. · The assumptions used for any reporting of metal equivalent values should be clearly stated.	· Length weighted average grades have been reported. · No high-grade cuts have been applied to reported grades. · Metal equivalent values are not being reported; however, Li is reported as ppm and converted to the oxide Li₂O for resource purposes. The conversion factor used is to divide the Li value by 10,000 and multiplying by 2.153 to represent the value as a percentage.
Relationship between mineralisation widths and intercept lengths	· These relationships are particularly important in the reporting of Exploration Results. · If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported. · If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (e.g. 'down hole length, true width not known').	· The majority of holes have been drilled at angles to intersect the mineralisation approximately perpendicular to the orientation of the mineralised trend. · The geometry of the pegmatite at NOA is moderate dipping to the northeast and some holes have drilled at a close angle to the mineralisation in that part of the deposit.
Diagrams	· Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported. These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.	· A relevant plan showing the drilling is included within this release.
Balanced Reporting	· Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. · Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.	· All relevant results available have been previously reported.
Other substantive exploration data	· Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples - size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.	· Geological mapping and rock chip sampling has been conducted over the project area.
Further work	· The nature and scale of planned further work (e.g. tests for lateral extensions or depth extensions or large- scale step-out drilling). · Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.	· The present drill program has been designed to infill previous drilling to attain a measured or indicated class for an upcoming resource estimation. No immediate further work is planned unless directed. · Economic evaluation of the defined Mineral Resources.

Companies

Savannah Resources (SAV)

UK 100

Latest directors dealings

6 hours ago ASOS
6 hours ago MJ Gleeson
6 hours ago Rolls-Royce Holdings
7 hours ago Crest Nicholson Holdings
7 hours ago Naked Wines

All directors dealings today

Savannah Resources PLC Emanuel Proença, CEO	Tel: +44 20 7117 2489
SP Angel Corporate Finance LLP (Nominated Advisor & Joint Broker) David Hignell/ Charlie Bouverat (Corporate Finance) Grant Barker/Abigail Wayne (Sales & Broking)	Tel: +44 20 3470 0470
SCP Resource Finance (Joint Broker)	Tel: +44 204 548 1765
Filipe Martins/Chris Tonkin

Camarco (Financial PR) Gordon Poole/ Emily Hall / Nuthara Bandara	Tel: +44 20 3757 4980

LPM (Portugal Media Relations) Herminio Santos/ Jorge Coelho/Margarida Pinheiro	Tel: +351 218 508 110

Hole_ID	Prospect	Hole Type	Total Depth	East (mE)	North (mN)	Elevation (mASL)	Dip	Azimuth
23NOARC026	NOA	RC	111	599104	4609510	677	-60	198
23NOARC027	NOA	RC	40	599015	4609572	689	-60	198
23NOARC028	NOA	RC	40	599047	4609565	692	-60	198
23NOARC029	NOA	RC	42	599025	4609498	693	-60	200
23NOARC030	NOA	RC	35	598992	4609575	686	-60	200
23NOARC031	NOA	RC	30	598988	4609559	687	-60	200
23NOARC032	NOA	RC	123	599086	4609555	691	-60	200
23NOARC033	NOA	RC	20	598985	4609540	688	-60	200
23NOARC034	NOA	RC	40	598894	4609584	687	-60	200
23NOARC035	NOA	RC	43	598900	4609610	683	-60	200
23NOARC036	NOA	RC	35	598916	4609606	679	-60	200
23NOARC037	NOA	RC	67	598916	4609589	678	-60	200
23NOARC038	NOA	RC	35	599205	4609406	691	-60	200
23NOARC039	NOA	RC	61	599238	4609389	687	-60	200
23NOARC040	NOA	RC	45	599174	4609436	687	-60	200
23NOARC041	NOA	RC	60	599135	4609470	681	-60	200
23NOARC042	NOA	RC	85	599190	4609491	673	-60	200
23NOARC043	NOA	RC	130	599074	4609531	689	-60	200
23NOARC044	NOA	RC	35	599100	4609457	674	-60	200
23NOARC045	NOA	RC	35	599112	4609440	674	-60	200
23NOARC046	NOA	RC	35	598943	4609589	678	-60	200
23NOARC047	NOA	RC	25	598938	4609573	679	-60	200
23NOARC048	NOA	RC	105	599157	4609520	666	-60	200
23RESRC038	Reservatorio	RC	207	599510	4609249	655	-90	0
23RESRC039	Reservatorio	RCDD	135	599511	4609246	655	-70	150
23RESRC040	Reservatorio	RCDD	120	599557	4609245	649	-90	0
23RESRC041	Reservatorio	RCDD	120	599559	4609241	649	-70	150
23RESRC042	Reservatorio	RC	12	599650	4609094	594	-60	150
23RESRC043	Reservatorio	RC	9	599687	4609109	591	-60	150
23RESRC044	Reservatorio	RC	18	599618	4609011	599	-60	150
23RESRC045	Reservatorio	RC	130	599679	4609231	619	-90	0
23RESDD009	Reservatorio	DD	90.5	599764	4609176	611	-60	150
24RESDD010	Reservatorio	DD	40	599688	4609110	590	-60	150
24RESDD011	Reservatorio	DD	50	599617	4609016	599	-60	150
24RESDD012	Reservatorio	DD	50	599661	4609070	590	-60	150
24PNRRC020	Pinheiro	RC	110	601380	4606960	542	-60	270
24PNRRC021	Pinheiro	RC	113	601402	4606933	543	-60	220
24PNRRC022	Pinheiro	RC	100	601401	4606936	543	-60	265
24PNRRC023	Pinheiro	RC	138	601408	4606892	547	-60	190
24PNRRC024	Pinheiro	RC	144	601406	4606893	547	-65	220
24PNRRC025	Pinheiro	RC	100	601402	4606931	543	-55	290
24GRARC132	Grandao	RC	90	601743	4608177	521	-90	0
24GRARC133	Grandao	RC	39	601919	4607864	563	-90	0

Hole_ID	Prospect	From (m)	To (m)	Interval (m)	Grade Li₂O %
23NOARC026	NOA	64	71	7	1.31
and		94	97	3	0.78
23NOARC027	NOA	No Significant Assays
23NOARC028	NOA	No Significant Assays
23NOARC029	NOA	15	17	2	1
23NOARC029	NOA	32	36	4	1.25
23NOARC030	NOA	23	25	2	0.81
23NOARC031	NOA	12	17	5	0.98
23NOARC032	NOA	98	104	6	0.82
23NOARC033	NOA	7	11	4	1.22
23NOARC034	NOA	31	37	6	1.2
23NOARC035	NOA	30	36	6	1.38
23NOARC036	NOA	21	29	8	1.34
23NOARC037	NOA	16	23	7	1.16
23NOARC038	NOA	No Significant Assays
23NOARC039	NOA	No Significant Assays
23NOARC040	NOA	13	24	11	1.22
23NOARC041	NOA	31	44	13	1.12
23NOARC042	NOA	66	71	5	0.58
23NOARC043	NOA	105	107	2	1.58
and		114	117	3	1.24
23NOARC044	NOA	0	9	9	1.18
23NOARC045	NOA	No Significant Assays
23NOARC046	NOA	10	16	6	1.36
23NOARC047	NOA	9	15	6	0.96
23NOARC048	NOA	No Significant Assays
23RESRC038	Reservatorio	159	200	41	1.21
23RESRC045	Reservatorio	70	110	40	1.17

Phase 1 Resource Drilling Completed

APPENDIX 1 - Drill hole locations of Phase 1 RC and Diamond Resource Holes.

APPENDIX 2 - Summary of Significant Intercepts from NOA and Reservatorio using a 0.5% Li₂O Cutoff.

APPENDIX 3 - JORC 2012 Table 1 -DFS Infill Drilling

Companies

UK 100

Latest directors dealings

Phase 1 Resource Drilling Completed

APPENDIX 1 - Drill hole locations of Phase 1 RC and Diamond Resource Holes.

APPENDIX 2 - Summary of Significant Intercepts from NOA and Reservatorio using a 0.5% Li2O Cutoff.

APPENDIX 3 - JORC 2012 Table 1 -DFS Infill Drilling

Companies

UK 100

Latest directors dealings

APPENDIX 2 - Summary of Significant Intercepts from NOA and Reservatorio using a 0.5% Li₂O Cutoff.