Weir study on energy in mining

Weir Group PLC
04 December 2023
 

 

New study by Weir highlights big energy saving opportunity in mining

 

The Weir Group PLC, a global mining technology leader, has completed a comprehensive study that highlights a significant opportunity to reduce energy use and emissions in comminution, the rock crushing process that is key to minerals extraction, and that consumes around 3% of the world's electrical power each year1. The study shows that replacing conventional technology with innovative new solutions can cut energy use by 40% while also avoiding 50% of CO2e emissions.

Speaking at a COP28 panel discussion hosted by the Ministry of Economy, Trade and Industry of Japan and moderated by the World Business Council for Sustainable Development (WBCSD), Paula Cousins, Chief Strategy and Sustainability Officer at Weir revealed the details of the study that demonstrates how using innovative technologies to crush rocks can yield significant sustainability benefits at lower operating cost.

The findings of the study come at an important time. Metals, such as copper, nickel and lithium, are critical elements of the technologies that will power a low carbon future and it is widely accepted that a substantial increase in the production of these metals is needed for the transition to net zero. In response, the mining industry is actively seeking to adopt new technologies which extract and process those metals in more energy efficient and sustainable ways, alongside increasing the use of renewable power. 

Weir's study focuses on comminution - the crushing process that turns big rocks into tiny particles to expose the entrapped mineral so that it can be extracted later in the mining process. Comminution is the most energy intensive stage of a typical mine site process. It is already electrified and is responsible for at least one-third of an average mine's energy use and CO2e emissions1 and globally consumes around 3% of the world's electrical power1.

 

Given its energy intensity, the decarbonisation opportunities in comminution are huge, with the basic comminution process not having changed significantly for many decades. Weir is collaborating with customers and other partners to redefine the process, developing innovative combinations of proven technologies to make significant improvements to efficiency and environmental performance.

 

Unveiling the study during the panel discussion at COP28, Paula Cousins, Chief Strategy and Sustainability Officer at Weir said:

"The need for technology solutions in mining is compelling - the world needs more transition metals to achieve net zero, but the mining industry needs to extract these using significantly less energy and water. Our new, externally assured study highlights the potential for energy savings of 40% and for 50% of CO2e emissions to be avoided in comminution, the most energy intensive stage of mining processes. By adopting a systems-based approach to technology collaborations, we can help the mining industry scale up and clean up at the same time".

The full video of the panel discussion will be made available to view by the Ministry of Economy, Trade and Industry of Japan shortly.

About the avoided emissions study

The study is the first to utilise WBCSD's Avoided Emissions Guidance to study mining processes and the avoided emissions results have been independently assured by SLR Consulting Limited. Three of Weir's technology combinations were evaluated against a conventional comminution circuit design for an archetypal mine processing 15 million tonnes of copper ore per year in Chile.

All three of the technology combinations are shown to yield sizeable benefits versus the traditional circuit. In the optimal combination, the comminution process consumes around 40% less energy and can avoid up to 50% of CO2e emissions. Importantly, there is no trade off elsewhere, as the redefined process uses less water too.

Further details of the avoided emissions study are available here.


1. CEEC International, 2021: Mining Energy Consumption: https://www.ceecthefuture.org/resources/mining-energy-consumption-2021

 

 

Enquiries:


Investors: Edward Pears

Media: Sally Jones

Citigate Dewe Rogerson:

Kevin Smith

+44 (0) 141 308 3725

+44 (0) 141 308 3666

+44 (0) 207 638 9571

Weir@citigatedewerogerson.com

 

About The Weir Group PLC

Founded in 1871, The Weir Group PLC is one of the world's leading engineering businesses with a purpose to make its mining and infrastructure customers' operations more sustainable and efficient. Weir's highly engineered technology enables critical resources to be produced using less energy, water and waste while reducing customers' total cost of ownership. The Group is ideally positioned to benefit from structural trends that support long-term demand for its technology including the need for more essential metals to support economic development and carbon transition. The Group has c.12,000 employees operating in over 60 countries with a presence in every major mining region of the world. Find out more at www.global.weir.

 

Weir's ordinary shares trade on the London Stock Exchange (ticker: WEIR LN) and its American Depositary Receipts trade over-the-counter in the USA (ticker: WEGRY).

This information is provided by Reach, the non-regulatory press release distribution service of RNS, part of the London Stock Exchange. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact rns@lseg.com or visit www.rns.com.

RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services. For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our Privacy Policy.
 
END
 
 

Companies

Weir Group (WEIR)
UK 100

Latest directors dealings